Category Archives: Mesin Potong

Mesin Cut to Length / Coil Shearing merk KING JIME


drawing mesin cut to length


mesin cut to length merk KING JIME
Bongkar Mesin King Jime

Salah satu mesin yang penting di dunia Sheet Metal adalah Mesin Cut To Length.

Mesin Cut to Length adalah mesin yang berfungsi untuk membuka, meluruskan dan memotong secara melintang Coil sehingga menjadi lembaran plat.

Mesin Cut to Length ini sangat menentukan karena kepresisian ukuran potong berpengaruh kepada pengerjaan material selanjutnya.

Technical datas:



MATERIAL: Hot Rolled steel

Coil ID: 508 mm

Strip width : 1600 mm (Max.)

Thickness : 1.0-6.0mm

Coil weight : 25Tons (Max.)

Out put :

Stacking length : 500-4000mm


Line speed : Max 25m/ min  (MAX.)

Production : Cutting quantity(pcs):5pcs/min, 3000mm/pcs)

Accuracy (LENGTH) : +/- 1.0 mm /M

Accuracy (DIAGONAL) : +/- 1.0mm/2M

Accuracy (LEVELLING): +/- 2.0mm/ m2

Incoming Power Source : AC(380±10%)V, 3 phase,50HZ

Control Power Source : AC 220V,50 HZ

Solenoid Valves : AC 220V,50 HZ

Machine direction:from left to right or right to left,face to operation cabinet(optional)

Machine color:blue and yellow


  1. Hydraulic Coil car
  2. Hydraulic Decoiler
  3. Hydraulic entry guide device
  4. Four hi straightener
  5. Pinch roller
  6. Shearing Machine
  7. Lifting table
  8. Hydraulic Systems
  9. Pneumatic Systems
  10. Electrical System PLC Control


  1. Coil car:

It is used to ship coils onto the center of decoiler.

Technical Data:

  • Type of Coil Car       : Guide Bar Type, Floor mounted
  • Lift Capacity          :25Tons (Max.)
  • Lift / Lower function : By hydraulic cylinders with four Colum
  • Lubricant: Grease gun.
  • Hydraulic Decoiler

It is hydraulic expansion, including hydraulic press device and mechanical guiding device, to guide coil tip into the straightener and there is assistant support device.

Technical Data:

  • Capacity          : 25Tons
  • Expansion:hydraulic
  • Expansion range suitable for coil ID: 508mm,610mm
  • Lubricant: Grease gun.

5. Entry guide

It consists of frame, supporting device, press device and drive system. Lifting of supporting device and press device is driven by hydraulic to make coils tip into the straightener.

  • Four hi straightener

It adopts pinch rolls and Leveling rolls. Upper and lower leveling rolls drive by universal coupling. Upper and lower leveling rolls have supporting rolls, support force is adjustable. Reduction and angle is adjusted by upper leveling rolls according to different thickness. Two adjustment methods : manual fine adjustment and electric rough adjustment. Lubrication adopts grease lubrication pump to center lubrication.

●Type of straightener:   4 Hi, Work roll driven.

●Work Roll:  Quantity of Rolls – 13 Nos.

●Size of Rolls – Ø120MM x 1600 MM Length

●Material – 42CrMo

●Treatment—hardening and tempering, intermediate frequency quenching

●Hardness –HRC 55

●Surface Plating – Chrome Plating

●Motor: 90KW AC Siemens motor

7. Pinch out roll

It consists of frame, stand housing, sliding block, feeding rollers, lifting device and power device. Upper roll lift by hydraulic.

8. Hydraulic shear

Δ8×2000 hydraulic shear

9. Hydraulic lift table

It includes base, connecting rod device, hydraulic lifting system, table and drive device, it is used to stack sheet.

10. Hydraulic System

Hydraulic system includes hydraulic station and hydraulic accessories.

Flux:25L/min         Pressure:12MPa         Power:5.5KW

11. Pneumatic systems:

Pneumatic system includes pneumatic control station and pneumatic accessories.

Capacity:1L                       Pressure:0.6MPa

12. Electrical System:

Electrical System supply will remain in our scope and is provided with following list.

The electrical system is consist of following

  • PLC for interlocking and programming from Siemens, Germany.
  • Touch Panel screen from Germany Siemens.

Jika ada kebutuhan tentang mesin Beam Drilling Line AKYAPAK baik dengan Bandsaw maupun tidak silahkan menghubungi saya,

Saldy Kurniawan

HP: 081345-026234


Mesin Slitting Line untuk Logam Merk KING JIME

Dalam proses fabrikasi sheet metal atau plat logam terdapat istilah coil. Coil adalah lembaran logam yang digulung sedemikian rupa sehingga membentuk semacam tabung logam dan diikat. Bentuk Coil logam ini tujuannya adalah untuk memudahkan proses transport material.

Coil ini awalnya dipasang pada uncoiler dari mesin slitting logam.

Dengan mesin Slitting selanjutnya coil akan dibagi2 menggunakan blade slitting sampai dengan ukuran lebar diinginkan. setelah itu digulung jadi coil lagi yang lebih kecil ukuran lebarnya.

I.Technical information:


Material weight: Max 5tons

Material thickness:0.4-1.0 mm

Coil ID:508mm

Material width: max 1300mm

Slitting speed: 0-60m/min

Incoming Power Source : AC380V, 3 phase,50HZ

Control Power Source : AC 220V,50 HZ

Solenoid Valves : AC 220V,50 HZ

Set up Position : from left to right or right to left(optional)

Machine color:blue and yellow

II. Machine parts in the working line

  1. Decoiler                         
  2. Bridge table  I                              
  3. coil guide and pinch roll                    
  4. Slitting machine
  5. scrap winder (both sides)
  6. Bridge table  II
  7. separator and tension table
  8. Recoiler
  9. Over arm separator in the recoiler.

10.10 pieces of blades and Matched accessories:spacer,wooden for slitting machine,separator and separator disc for recoiler.

Ⅳ.Technical description

1. Decoiler with manual expansion

Function: Loading coils and create tension for coil strips, it consists of frame, main shaft, expandable core, press device, and driven device.

Main Structure: Welded by section steel, A3 steel, #45 forged steel, annealed after welding; bearing pedestals are achieved by one time boring to ensure concentricity and no radial movement.

2.Bridge table  I

The entry loop will create a buffer zone for easier centering for next stage process. Light source and sensors is provided for sensing the loop position.


Type    : Bridge table.

  • Structure           : Steel fabrication
  • Lubricant          : Grease gun

3. Coil guide and pinch roll

Function: Guiding strip into slitter. It consists of side guide, pinch roll and short transition bridge.


◆Side guide:Width shall be adjustable manually with hand-wheel and movement shall be

accomplished by guiding shaft with Left Hand & Right Hand Thread on the same shaft.

A fabricated body with roller mounted vertically at two sides (2 Nos. rollers each side). Roller is mounted vertically.

  • Width range         : 0~1300mm
  • Adjustment         : manual
  • Lubricant           : Grease gun

◆Pinch roll: 2 pinch rolls with PU rubber coated, the upper roll is adjustable by cylinder.

4. Slitting machine

Function: Slit strip into narrower sizes, it consists of frame, blade shafts, shaft housing, lifting device and driven system.

Main frame is welded by section steel, annealed after welding

Blade shaft material: 42CrMn alloy steel, Ф120mmx1300mm, it’s rough tooled, tempered, medium frequency modulated, grinded, hard chrome plated and regrinded etc. to ensure accuracy of slitting,

Fixation of shaft: Fixed by double nuts

Shaft housing: Housing and upper bearing pedestals use #45 cast steel, lower bearing pedestals use #45 forged steel. Shaft housing is movable by electric control, shaft is lifted by electric control through screw.

Driven System: 

  • Type               : Round knife cutting.
  • Structure           : Fabricated Steel, 42CrMn alloy steel
  • Slitter Axel          : Ø120mm × 1300mm× 2
  • Slitting Speed        : max 60 m/min.
  • Vertical adjustment   :Motorizes anti-backlash worm gear for

Vertical adjustment

  • cutter clamping       : Nuts
  • Lubricant            : Grease gun
  • Motor:AC 22KW

5. Scrap winder

Function: Inspecting strip width; winding up scraps


◆Scrap Winder: It consists of frame welded by steel plates, end plate and articulated expandable stand, winding device and driven system.

6. Bridge table  II

The entry loop will create a buffer zone for easier centering for next stage process. Light source and sensors is provided for sensing the loop position.

Type                   : bridge table.

  • Structure           : Steel fabrication
  • Lubricant          : Grease gun

7. Strip separator and tension unit

Function: Position and create tension for the strips before rewinding, it consists of main frame, separating frame, tension station, guide roll.


◆Welded structure of section steel, steel plate, annealed after welding.

◆Separating frame: Connected by 2 guide rods with hard chrome plated, lifted by cylinder, separating pieces are installed on shaft and removable.

◆Tension station: It consists of side housing, upper and lower plate with woolen felt.

◆Guide roll: Guiding strip to rewinder, it consists of bearing pedestal, seamless steel pipes, wrapped by PU rubber.

  • Structure               : Steel fabrication
  • Separator roll           : Ø 100mm × 1300mm

8. Recoiler with manual expansion

Function: Loading and creating tension for strip rewinding, it consists of frame, main shaft, core with clamp, separating device etc


◆Main frame: It consists of frame welded by section steel, A3 steel, #45 steel forged bearing pedestals which are treated by one time boring to ensure concentricity.

◆Separator: Separating and positioning of strip before rewinding. It consists of separating roll with hard chrome plated, support arm, driven force increases with expanding diameter of coil.

  • Recoiler ID        :  Ø 508
  • Mandrel Surface    : Chromium plated
  • Load capacity         : Max.5tons
  • Motor : AC 37KW

Mesin Slitting membutuhkan beberapa orang operator untuk menjalankannya. Dibutuhkan koordinasi yang baik antara bagian awal, tengah dan akhir line agar produksi bisa berlangsung dengan mulus.

Jika anda ada kebutuhan mesin slitting atau uncloiler atau decoiler atau bahkan messin cut to length.

Mohon hubungi saya: Saldy Kurniawan HP: 081345026234 atau email:

Band Saw Machine / Mesin Gergaji Pita merk COSEN


Semi-Automatic Double Column

Heavy-Duty Bandsaw

COSEN’s SH-1713 is an extremely heavy duty production machine, which incorporates a massive base, twin column saw frame guide with top link cross, which keeps a strong support and equal cutting force over the entire cutting cycle. In addition, its basic equipment includes a 20 HP blade motor, efficient planetary gear box, 80mm (3 1/8”) wide blade and an independent control panel for easy operation. The massive structure and precision ground columns of this machine make Cosen’s SH-1713 ideal for cutting alloys and large forged materials.


Maximum Cutting Capacity Rounds
Rec H x W
1300 mm (51.2”)
1300 mm (51.2”)
1300 x 1700 mm (51.2” x 67”)
Saw Blade Size
13000 x 80 x 1.6mm (512” x 3 1” x 0.06”)
15 – 80 m/min (49 – 264 fpm)
Automatic Hydraulic
Hydraulic Clamping Force Electric Power Driven Wire Brush
Motor Output Blade
20 hp (15 KW)
3 hp (2.2 KW)
0.5 hp (0.375 KW)
Tank Capacity Hydraulic Oil
160 L
200 L
Vise Control Method Hydraulic  
Workbed Height 620 mm (24.4”)
Machine Weight 22000 kg (48500 lbs)
Floor Space (LxWxH) 3000 x 5892 x 4228 mm (118” x 232” x 166.5”)


Machine Structure

  • The heavy duty, rigid saw frame is supported by two large bore hydraulic cylinders, providing unsurpassed rigidity, and the smoothest cutting attainable throughout the cutting cycle.
  • Dual Column design with rigid, precision ground columns ensures smooth saw frame movement and the consistently stable cutting force required throughout the cutting cycle.

Blade Drive & Lubrication System

  • Planetary gear reducer drive is used to drive the blade and provides an increased level of torque efficiency than a worm gear reducer. With Cosen’s specially designed planetary gearbox equipped to your machine, mechanical efficiency can be raised to above 90%, largely increasing cutting efficiency and saving your electrics bills. While due to low efficiency, the traditional worm gearbox may fail to drag along the blade and cause jammed blade, Cosen’s planetary gearbox would not have this problem at all. Specially designed to sustain high lateral pressure, this drive system facilitates even more perfect cutting performance.
  • Inverter Blade Speed Control is used for higher efficiency and accurate infinitely variable blade speed with easy to read LED speed indicator.
  • Powered Chip Brush is driven by an independent electric motor for optimum blade cleaning, prolonging blade life & blade guides.
  • Hydraulically powered guide arm is positioned from the operator’s counsel permitting more efficient cutting by being moved closer to the material. 

Blade Guidance System

  • Hydraulic Blade Tension insures consistently accurate recommended blade tension for straight cuts and increased blade life.  The blade tension is slightly released when the machine is idle, resulting in longer blade life.
  • Hydraulic Blade Tension System, with large easy to read pressure gauge, makes changing saw blade easy and convenient.
  • Carbide blade guides are activated hydraulically providing consistent and correct blade guide adjustment insuring straight cuts.
  • Carbide Blade Guides provides continual self-adjusting blade support for straight cuts and are relieved to facilitate coolant flow thru the guides for extended blade life.
  • Additional blade guiding bearings contacting the back of the blade provides extra support for added penetrating force for faster cuts.
  • Heavy cast iron moveable Guide Arm is hydraulically powered from the operator’s control counsel for easy operation, and efficient cutting.


  • Last Cut function will allow the operator to complete a cut with the machine able to safe shut itself off after finishing the last cut of the day.
  • Ergonomically designed, user-friendly control panel.
  • Precision Feed Pressure control valve with micro-precision adjustment.
  • Saw Blade Height Selector allows the user to adjust the saw frame height and cutting depth.
mesin bandsaw cosen

Material Feeding and Clamping

  • Hydraulic driven work bed with rollers provides a safe and convenient way to load and unload the material, and the material can be fed from the front side or the rear side of the machine with equal ease.
  • Hydraulically controlled movable work bed for moving large material safely.
  • Vises are located on both sides of the blade and are driven by three oversized, full stroking hydraulic cylinders, which can clamp large material securely throughout the cutting cycle.
  • Stock Position Cylinder, which is built in the fixed vise, will push the stock away from the fixed vise for easier handling and lifting.
  • Shadow Light projects the blade line on the material making measuring lengths easy. 


  • Blade breakage and/or slippage are detected automatically and will safely shut down the machine automatically.
  • Interlock design in electrical and hydraulic system prevents the saw from accidental start, i.e. work vise and blade guides need to be clamped first before blade starts, guide arm will not move until the blade guides are released from clamp pressure.
  • All moving parts, blade covers, and guarding on the saw are painted Alert Orange to increase safety alertness.
  • All exposed electric wiring and hydraulic circuit are protected by conduits.


  • Bi-metal saw blade.
  • Operation & parts manual.
  • Tool Box with tools, leveling pads, and an additional wire brush


  • Hydraulic chip conveyor – Hydraulic driven shaftless design allows maximum chip removal rate without worrying about burnt up motor when material falls and binds in the chip conveyor.
  • 2M Roller Table – 2M long steel table with machined rollers spread out evenly along the table to facilitate smooth material feeding. (Width of roller differs by model) One to two sets of side rollers guard the material from both sides allowing material to be fed straight forward. Table height can be adjusted.
  • Blade Deviation Detector – Blade deviation detector will detect any blade deviation to insure straight cuts. The device can be pre-set to a deviation value. If the value is exceeded the machine will stop.

Mesin Bandsaw adalah mesin yang berfungsi memotong benda berprofil, berongga maupun pejal. Mesin ini bisa berfungsi efektif disaat laser ataupun plasma tidak bisa melakukannya.

Jika anda ada kebutuhan mesin bandsaw atau gergaji pita bisa menghubungi saya Saldy Kurniawan HP: 081345026234 atau email: atau

Mesin CNC Turret Punch merk JFY

Mesin CNC Turret Punch merk JFY adalah mesin yang sangat berguna dalam pengerjaan plat. Mesin Turret Punch sangat cocok untuk pekerjaan yang berulang dan berpola sama dengan kuantitas yang sangat banyak.

Selain mampu melakukan pekerjaan potong atau membuat lubang, mesin ini juga mampu melakukan pekerjaan forming.

Mesin CNC Turret Punch JFY ini adalah salah satu Brand yang dimiliki oleh TRUMPF Group dari Jerman.

TRUMPF Group terkenal sebagai pembuat mesin kerja plat logam dengan kualitas premium.

Member of the TRUMPF Group

I. Main Specification

CNC Turret Punch menggunakan Servo Motor

II. Components List

III. Main Technical Features

1. Adopts Germany H+L hydraulic system with proportionate servo valve, full loop control, and wonderful dynamic and static state reaction. High distinguish, no middle position dead zone, strong capacity for anti-vibration.

(1) Adjustable speed and stroke

a. The punch stroke can be selected according to the thickness of the sheet automatically, improving the work efficiency.

b. The punch speed is adjustable during each point of each single station,

c. the machine can realize the high speed swift during empty run and low speed during real punch, in this way, the punch quality can be improved effectively, and there is really no noise during punch.

d. Precise control of PUP can make the process of special workpiece quite conveniently.

(2). Automatic hydraulic overload protection.

(3). The invariable punch force during the whole procedures makes the punch quality to a high level and ensures the process stability.   

2. The turret with bushing is process in pairs

The turret is processed by special device to ensure the coaxiality of the upper and lower turret and expand the service life of tooling; the bushed turret simplifies the turret structure to extend the service life; long tooling can be used to increase the guiding accuracy and expand the tooling service life (for thick sheet).

3. Imported pneumatic, lubricating and electric components ensure the reliability of the whole machine.

4. Large lead guideway and ballscrew from Japan or Germany ensures high feeding precise.

5. Hard brush and ball mixed worktable reduces the noise and vibration during running and also protects the sheet surface.

6. O-type welded frame has been vibrated for twice, the stress has been deleted completely. The frame is processed by Germany SHW dual-side pentahedron processing center at one time, on need to make second time positioning. 

7. Floating clamp with large clamping force ensures the stable feeding; integrated carriage ensures good rigidity and convenient movement of clamp.

8. The system is featured with the function of automatic clamp protection to avoid the damage of tooling and clamp, ensuring the continuous running of the program.

9. The auto-index adopts high accurate worm wheel and worm mechanism, ensuring high precise indexing. The Max. tooling diameter can reach 88.9mm and the auto-index can be expanded to 4 nos.

10. Integrated beam structure to make the carriage and beam into one part, increasing the rigidity and brings the accurate positioning. The machine can run much more stably during high speed feeding and it puts an end to the deflection of X and Y axes.

11. Grease lubrication can send the lubrication grease to the relative lubricating point directly, reducing the friction of each working pairs and increasing the service life.

IV. Dispatch Document, Accessory & Spare Parts

Dispatch Document

No. Name Qty. Remark
1 Packing List 1 set  
2 Quality Certificate 1 set  
3 Mechanic Operation Manual 1 set  
4 Electrical Operation Manual 1 set  
5 Tooling Drawing 1 set  
6 System Documents 1 set  
7 Foundation Drawing 1 set  
8 Electrical Principal Drawing 1 set  
9 Auto-program Software 1 set  
10 Tooling manual 1 set  
11 FANUC Ethernet Communication Software 1 set  

Dispatch Accessory

No. Name Gauge Qty.
1 Dual-head Spanner 5.5×7-22×24 1 set
2 Moveable Spanner 200 1 no.
3 Socket Head Spanner S1.5-S10 1 set
4 Cross Screwdriver 100×6 1 no.
5 Grease Gun HS87-4Q 1 no.
6 High Pressure Grease Gun   1 no.
7 T-Shape Handle M14×1.5 1 no.

Spare Parts:

No. Name Gauge Qty. Remark
1 Clamp gear board   3 nos. T02-20A,000,000-10C
2 Brush   20 T02-19,000,110-35 (not for full-ball worktable)
3 Hose Ø 12 10m  
4 Hose tie-in Ø 12 1 no.  
5 Spring   20 nos. T02-06,001,000-02
6 Screw in clamp GB70.3-2000 20 nos. M4x10
7 Fuse   1 pc. A03B-0815-K001
8 Network Cable RJ45 1 pc. Used for FANUC transfer
9 Cross Sunk Screw M5*8 20 nos. GB819.1-2000
10 Socket Head Cap Screw M6*0.75*20 4 nos. GB70.1-2000
11 CF card   1 set  

VCNC System

FANUC CNC system is the specialized CNC system developed by Japan FANUC especially for the purpose of meet the features of this type of machine, improving the reliability of the machine to a large extent.

I、System Characteristics

1. Graphic and punch function;

2. Convenient universal G code program for easy operation;

3. Universal RS232 standard port to communicate with computer conveniently;

4. Advanced full digital servo motor and servo system;

5.10.4″ LCD colorful display;

6. Pulse encoder semi-loop feedback;

7. EMS memory: 256K;

8. Field program, office program;

9. Chinese and English display;

10. Function of graphic simulation;

11.One large capacity PCMCIA card for the backup of system parameter, ladder drawing and processing program, and realize the online process of large capacity processing program;

12. Increment in the smallest unit, position detection ad servo control to realize high speed and high accurate operation;

13. The operation button on the panel can be defined according to the real requirement;

14. Super high speed clutch data cables with little cable connection;

15. High integration, specialized software. Short time for start up, the data will not be lost if power is short of supply suddenly;

16. Storage of 400 pieces of program.

II、System Function:

1. Linear axes: X, Y axes, rotating axes: T, C axes, punch axis: Z axis;

2. Alarm for electric error such as over- stroke.

3. Function of self-diagnose.

4. Function of soft limit.

5. Universal G code for program;

6. Function of tooling compensation;

7. Function of screw distance compensation;

8. Function of reverse gap compensation;

9. Function of coordinates deflection;

10. Function of reposition;

11. Function of AUTO, MANUAL, JOG mode;

12. Function of clamp protection;

13. Function of lock of inner register;

14. Function of parameter program;

15. Function of sub-program;

16. Function of swift positioning and punch lock;

18. Function of M code;

19. Absolute and increment program;

20. Conditioning, unconditioning jump.

VI. Requirement for Customer

1. Air supply: rated working pressure should be more than 0.6mPa, air flow: more than1.5m3/min

2. Hydraulic oil: Sheel TELLUS 46# anti-wear hydraulic oil and oil-servicing device, required oil mass should be 180L.

3. Power: 380V, 50HZ, power fluctuate: ±10%

4. Environment temperature: 0°C – +40°C

5. Environment humidity: relative humidity 20-80%RH(un-condensation)

6. Keep away from strong vibration or interfere of electromagnetism

7. Environment with little dust, no poisonous gas

8. Prepare the groundwork according to the foundation drawing

9. The user should select the technician or engineer for training, the educational background of whom should be at least graduated from technical secondary school, and arrange it for a long term.

Jika ada kebutuhan tentang mesin CNC Turret Punch silahkan menghubungi saya

Saldy Kurniawan

HP: 081345-026234


Info Jual Mesin Pengerjaan Logam

Perkenalkan nama saya Saldy Kurniawan HP: 0819-06686988 dari PT. Tecno Mesin Indonesia.

iseng iseng wefi

PT. Tecno Mesin Indonesia bergerak dibidang penjualan mesin fabrikasi logam.

Mesin fabrikasi logam yang kami jual tersedia baik secara stok maupun inden.

Mesin-mesin tersebut kami datangkan / import dari Eropa maupun Asia.

Kami menjamin garansi purna jual mesin yang kami supply baik servis maupun spare part.

Karena mesin tersebut akan digunakan secara terus menerus, jadi kami akan menjamin support layanan purna jual selama masa garansi secara gratis.

Kami juga melayani kontrak servis maupun panggilan servis untuk mesin-mesin diluar garansi maupun mesin yang dibeli dari supplier lain dengan biaya yang terjangkau.

Mesin-mesin tersebut meliputi sebagai berikut :

  1. Mesin Tekuk/ Bending Plat (Press Brake)
  2. Mesin Potong / Gunting Plat (Shearing Machine)
  3. Mesin Roll / Gulung / Bending Plat (Plate Bending Machine)
  4. Mesin Roll / Bending Profil / Siku / Hollow / Pipa / UNP / H-Beam / I channel / T channel
  5. Mesin Potong Laser (CNC Fiber Laser Cutting)
  6. Mesin Potong Plasma (Plasma Cutting)
  7. Mesin Drilling (CNC Beam Drilling Line)
  8. Mesin Pons (Punching Machine / CNC Turret Punch / CNC Index Punch)
  9. Mesin Gergaji Pita  (Bandsaw machine)
  10. Mesin Slitting
  11. Mesin Cut to Length
  12. Mesin Flanging
  13. Mesin Bodem
  14. Mesin Iron Worker
  15. Mesin Folding
  16. Mesin Produksi Pipa / Hollow
  17. dll.

Kami adalah pilihan yang bisa diandalkan untuk membantu anda dalam penyediaan mesin-mesin fabrikasi logam, terutama untuk pengerjaan plat logam.

Untuk itu silahkan hubungi :

Saldy Kurniawan HP: +62819-0668 6988 (WA, WeChat, Line, Telegram) 

email :

website company :