Arsip Kategori: punching

Mesin Multi fungsi Punching, Shearing dan Notching plat, Potong siku, sudut, profil, round bar, square bar dll


  “YSD” Q35Y – 20 IRON WORKER

Ini adalah Mesin Multi fungsi Punching, Shearing dan Notching plat, Potong siku, sudut, profil, round bar, square bar dll.

 
Technical specifications:
* Flat bar shearing Width x Thickness mm              :       330 x 20 ; 480 x 10
                Square bar mm                                             :       50 x 50
                Round bar mm                                              :       Φ 50
                Joist (type) ∆                                                 :       16#
 * Section Channel (type) ∆                                         :       16#
   Shearing T(type) mm                                                :       100 x 12
   Angle bar                                                                           
                Cutting at 90° mm                                        :       160 x 160 x 14
                Cutting at 45° mm                                        :       80 x 80 x 10
 * Punching Diameter x Thickness mm                     :       Φ 25 x 20, Φ 150 x 3.5
 * Notching
                Notching die L x W x T mm                         :       100 x 52 x 13
 * Flanging die (one stroke) L x T ∆ mm                    :       500 x 3
                                                                                                250 x 15
 * Tube notching ∆ mm                                                :       Φ 108
* Shutter die ∆ mm                                                      :       96 x 9 x 2 x 3
* Punching force KN                                                   :       800
* Max. stroke of the cylinder mm                             :       80
* Depth of throat mm                                                 :       330
* Motor power KW                                                     :       5.5
* Overall dimensions L x W x T mm                          :       1820 x 790 x 1790
* Approx. weigth kg                                                    :       1800
Note : for optional
Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (swing beam shearing), gunting plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching or turret punching), press (stamping), deep drawing (hydraulic press), plasma cutting (potong plasma), laser, water jet, marking, engraving, dll. anda bisa menghubungi saya

Saldy Kurniawan

HP : +6281345026234 / +6285822116234

Email : kurniawan.saldy@gmail.com atau Saldy@pt-tmu.co.id

saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.

 

Mesin Drilling Beam CNC + Bandsaw + Marking Device

Mesin Drilling Beam CNC + Bandsaw + Marking Device

Mesin Drilling Beam CNC + Bandsaw + Marking Device
                  INTRODUCTION OF OUR 1ADM 600 CNC DRILLING MACHINE
The beam drilling center is considered as an integrated system.
And this system is consisting of Input Conveyor + Beam Drilling Center + Marking Unit + Output Conveyor.
With the 1ADM 600 CNC (Computer Numeric Control) you will be able to control all the machine systems.
To drill the steel beams used on metal bridges and constructions, the profile should be located on the input conveyor. Then it will be brought to its position by the CNC Control with servo motor unit.
The ADM 600 CNC Machine blocks the positioned beam with hydraulic remoted special clamp jaws. The drilling process is performed by 1 Drilling Unit on 3 different axis. The drilling unit is controlled on their axis with the servo motor through the CNC, special variable screw drive groups and liner ball bearings. The drilling tools have got internal cooling system with pressure air-cooling water spray. The spindle has got 2 pcs ATC with 4 tools capacity.
We are using Mitsubishi servo motors, Thomson Neff (INA) screw drives, INA linear guides, Parker hydraulics and Rohm drills blocking unit on our machine.
Marking process is performed by dot system on beam side with a special machine. This process could be completed as an independent step at any time. There is no need to feed the material to the machine while marking because the marking head turns by CNC and move 150 mm horizontally.
Processed beams will be carried to the output conveyor. The carriers of the output conveyor are conducted with a reducer.
In order to facilitate the movement of the beam on the conveyor, there is a CLUTCH which allows cutting the mechanical connection between the carriers and the gearbox with motor.
 
INFEED CONVEYOR (FOR BARS UP TO 12 Meters) OPTIONAL 20 Meters
Powered roller way to feed up to 12 meters. Rolls are suitably spaced to allow the eventual insertion of cross loading tables.
a. rolls centerline distance                                  750 mm in the first conveyor
b. rolls centerline distance                                 1500 mm in the other 3 conveyors
c. rolls real width                                              650 mm
d. drive motor                                                  servo control
WORKING UNITS
MONO DRILLING HEAD
Drill heads of mono spindles model, in normal position it drills the center of the profile , at –90° drills the left side of the profile , at +90° drills the right side of the profile.
-90° or +90° positioning is performed by servomotor and the drill head get locked mechanically to the desired position. To take mono spindle to other positions first the mechanical lock getting unluck then it comes to the desired position by servo motor.
            Maximum drilling capacity at 52 KG/mm² tensile strength 32 mm
           
Spindle main motor: 7 kW (continuous power)
           
            Sensitive driver speed change unit ensuring rapid feed, drilling and rapid return of the drill. The system, there is no need to adjust cams, and also possible to use twist drills of different lengths to compensate material distortion thus reducing the cycle time.
            Mist air-oil coolant system operated  pneumatically and has got 2 different coolant systems.
Hydraulic double jaw vice assembly;
Automatic hydraulic double jaw vice assembly ensuring positive clamping of the work piece during the drilling operation, both horizontally and vertical.
Clamping jaws can operate unilaterally fixed reference for the working area on the beam flange. Clamping jaws close and open automatically and their control is included in the working cycle. No special program functions are required, holes by reference to the working area axis can be drilled as per program.
OUTFEED CONVEYOR (FOR BARS UP TO 12 M)
Carriage supporting structure for 12 meters long sections as standard, optional up to 20 meters conveyor can be requested.
Carriage is made by pincher for longitudinal positioning of the profile, controlled by CNC. The pincher can be rotated and adjusted to clamp both working area and flange of the section its arm can be lifted by operator by means of push button through an a.c. motor
                     Roll centerline distance         750 mm and 1500 mm
                 
                     Rolls real width                        650 mm
                                          
HYDRAULIC AND PNEUMATIC SYSTEM
Hydraulic power pack is generating the high working pressure as well as the low pressure for the working units and for the auxiliary circuites.
Hoses and connections
Circuit for cooling with air-oil heat exchanger
Hydraulic system is completed by solenoid valves and connected hoses.
Pneumatic system consists of solenoid valves and it is connected to machine system.
Electric system cabinet containing power and control equipments for the units positioning axes and for the auxiliary services. Control cabinet and electric cabinet are cooled by ventilator, also coolant air is filtered as well.
.
OPTIONS FOR THE INFEED CONVEYOR
4 meters extension to the infeed conveyor with respect to the standard length to allow processing of bars up to 12 meters long.
8 meters extension to the in feed conveyor with respect to the standard length to allow processing of bars up to 20 meters long.

 

TECHNICAL FEATURES OF 1ADM 600 CNC DRILLING MACHINE

Control Panel
CNC ( PC MITSUBISHI )
Mono Spindle Unit
1 ( working in 3 directions )
Drilling Diameter Ø
10 – 32 mm
Number of Spindle Turning per Minute
200 – 3000 rpm
Spindle Motor Power
7 kW
Maximum H – Beam
600 * 300
Tool Changing Unit
1 ATC with 4 tools
Threading – Tapping Unit
Optional
Input Conveyor Length
12 meters , Standard
Output Conveyor Length
12 meters , Standard
Central Lubrication System
Standard
TOOL COOLING
1.    Cooling Fluid / Air Micro Spray System for external cooling.
2.    Cooling fluid / air micro spray system from inside of the tool ( through spindle unit) for the internal cooling.
STANDARD
While changing internal cooling to external cooling ; the pressured air and coolant liquid hose need to be connected to external cooling joint.
Swarf Container
Optional ( Needs a special channels on the foundation floor )
Internal Cooling for Electronic Control Panel
Standard
Internal Cooling for Electronic Control Panel with Air-Condition
Standard
Technical Documentation
Standard
Maximum linear weight of the section
300 Kg

 

 

 

 

 

 

 

 

 

 

 

 

CAPACITY  OF 1ADM 600 CNC DRILLING MACHINE

ANGLE
minimum
mm
80 * 80 * 8
maximum
mm
250 * 250 * 28
U CHANNEL
minimum
mm
80 * 45 * 6
maximum
mm
400 * 110 * 14
HEA
minimum
mm
96 * 100 * 5
maximum
mm
600 * 300 * 30
HEB
minimum
mm
100 * 100 * 6
maximum
mm
600 * 300 * 15,5
HEM
minimum
mm
120 * 106 * 12
maximum
mm
572 * 306 * 21
H WELDED
PROFILE
maximum
mm
600 * 300 * 80
IPE
minimum
mm
80 * 46 * 3,6
maximum
mm
600 * 220 * 19
IPN
minimum
mm
80 * 42 * 3,9
maximum
mm
550 * 200 * 19

 

 

ADM 600 CNC DRILLING MACHINE

MODEL
QTY.
1ADM 600 CNC DRILLING MACHINE STANDARD WITH 12 METERS INFEED & 12 METERS OUTFEED CONVEYORS
 + BANDSAW
 + MARKING DEVICE
1
1
1
STANDARD
OPTIONAL
OPTIONAL

Mesin Pons Panel / Panel Punching Press Machine

Mesin Press Pons Panel atau Panel Press Punching Machine

 

 

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin Press Pons Panel atau Panel Press Punching Machine, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), roll profile, roll pipa (pipe roll bending machine), pon (punching), press (stamping), plasma cutting (potong plasma), laser cutting (potong laser),  CNC Beam Drilling Machine, dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 dan email pribadi saya di kurniawan.saldy@gmail.com atau email perusahaan saya saldy@pt-tmu.co.id saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.