Arsip Kategori: 4 roll

Mesin roll gulung plat hidrolik 4 roll merk AKBEND


Mesin roll gulung plat hidrolik 4 roll merk AKBEND

(AKBEND Four Roll Plate Bending Machine)

TECHNICAL SPECIFICATIONS OF AHS 30/20–25 mm HYDRAULIC 4 ROLLER PLATE BENDING MACHINE
Working  Length
3.100 mm
Maximum  Thickness             (Ø min = Top roll Ø x 3 )
25 mm
Pre-bending                             (Ø min = Top roll Ø x 3 )
20 mm
Top Roll Ø
390 mm
Bottom Roll Ø
360 mm
Side Rolls Ø
300 mm
Motor Power
18.5 KW
Length
5.740 mm
Height
1.983 mm
Width
2.100 mm
Weight
17.540 kg
·       Data based upon steel 240 N/mm2  YIELD POINT.
PLATE BENDING ROLLS’ CAPACITIES BECOME HALF OF THEIR USUAL PREBENDING CAPACITIES DURING THE REALIZATION OF CONE BENDING PROCESSES.
THE THICKNESSES AND THE LENGTHS ARE REDUCED TO MAXIMUM PREBENDING CAPACITIES’ HALFS.
A REGULAR PREBENDING PROCESS TO ROLL A PLATE INTO A CYLINDRICAL SHAPE REQUIRES PARALLELISM BETWEEN SIDE ROLLS AND TOP ROLL. THAT IS OBTAINED BY EQUAL BEARING LOADINGS AT THE END OF EACH SIDE ROLLS.
THE ABOVE MENTIONED LOADINGS CHANGE ACCORDING TO TILTING UP THE SIDE ROLLS TO OBTAIN CONES. THEN THE BEARINGS AT DROP END TAKES APPROXIMATELY 80% TO 100% OF THE WHOLE LOAD THAT APPEARS.
  
*** SINCE THE SWING GUIDES ARE DESIGNED ACCORDING TO THE LEVEL-ARM PRINCIPLE, THE MACHINE PROVIDES MORE POWER TO BEND THE MATERIAL AND BY THE HELP OF THIS POWER, PREBENDING GETS PERFECT AND THE STRAIGHT AREA IS DECREASED TO MINIMUM LEVEL.

 STANDARD EQUIPMENT

·       INDUCTION HARDENED ROLLS
·       DIGITAL DISPLAY
·       CONE BENDING DEVICE
·       TWO SPEED CONTROL
·       Machine body is steel construction ST-52.
·       All rollers mounted in bearing.
·       Separate control panel
·       Drop-end controlled from control panel in order to release easily bended metal sheet
·       Movement and parallelism adjustment of the rollers controlled from the control panel. (Ergonomic designed control panel which allows to control all the functions of the machine is independent from the machine.)
·       Central rolls are driven with hydraulic motor and reducer.
·       Electrical and hydraulic protection against overloads.
·       Hydraulic installation world wide known brands.
·       Electrical installation world wide known brands.
·       Suitable to “CE”.
 
OPTIONAL EQUIPMENT                                                                                                   
Variable Speed of Rotation
Side supporters for big sheet metal diameters  (For bending big diameters, side supports must be used in order to prevent from the material’s deformation by its own weight.)
Central supporters for big sheet metal diameters  (For bending big diameters, Central support must be used in order to prevent from the material’s deformation by its own weight.)
Material feed table (2m x 2m )
Oil Cooler System
Electro-Hydraulic Calibration
AK300CS NC  Control
AK 400 CS CNC Control

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (swing beam shearing), gunting plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching or turret punching), press (stamping), deep drawing (hydraulic press), plasma cutting (potong plasma), laser, water jet, marking, engraving, dll. termasuk Mesin roll gulung plat hidrolik 4 roll merk AKBEND, anda bisa menghubungi saya Saldy Kurniawan di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com atau email kantor saya Saldy@pt-tmu.co.id, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.