Mesin Bodem / Dish End Press Machine

DISH END PRESS BMBP-400×4000

 

DISH END PRESS BMBP-400×4000

TECHNICAL SPECIFICATIONS

Piston working stroke
500 mm
Uprights distance
4100 mm
Max. Working pressure
250 bar
Nominal force
400 tons
Piston descent speed max.
8 m/min
Piston working speed max.
110 cm/min
Piston fast return speed max.
8m/min
Total power
77 kw
Max. Length mm
6.000
Max. Width mm
5.600
Max. Height mm
4.000
Weight (appr.) kg
66.000
Specifications and machines appearances are subject to change without notice.
STRUCTURE
·       The machine frame built of high strength materials. All body parts welded and stress relieved prior to machining in order to meet tight manufacturing tolerances for appropriate assembling and maintenance
·       The dies made of special grade of material and heat treated.
·       All groups undercoated of special quality of chemical for high corrosion resistance
·       Safety barriers at top of the press body and stair for maintenance.
·       All cylinder bodies and pistons are hardened and tempered, chrome plated and grounded
·       Low number of greasing points by using self-lubricated components and besides that long lifetime

 COMPONENTS

The machine is equipped with a colored Touch Panel SIEMENS.  Easy to operate main cylinder, manipulators positions, to stop/start at any position, and diagnostic/alarms of all the functions. All controls can be seen on screen and buttons on control pulpit. Electric motors to power hydraulic pumps.

STANDARD EQUIPMENT

Main groups;
        Mobile control pulpit
        Press body
        Front manipulator
        Rear manipulator
·       Fully hydraulic machine
·       Die holder unit on the main cylinder x1
·       Speed fast-slow selection of the main cylinder
·       Main cylinder digital position read out
·       Working pressure manometer x1
·       Hydraulic components Parker or equivalent
·       Electrical components Siemens, Telemecanique, Schneider
·       All the controls on control pulpit by only one operator
·       Independent control of the manipulators, synchronized with main cylinder movements x2
·       Motorized rolls in order to rotate the plate x2
·       Counting and presetting of the main cylinder movements and plate rotation
·       Air cooling system for hydraulic oil x2
·       Stair for cylinder maintenance
·       Emergency button
·       Instruction Manual in English, hydraulic and electric projects, foundation drawing and all other tools required to operate the machine

TERMS AND CONDITIONS

WARRANTY:
     12 months or 2500 working hours (which comes first) after the first date of installation completed. 18 months from the shipment date from manufacturer factory. The machine is under warranty of any defective materials, workmanship or standard equipment.
   Any reparation by any other party without written approval of manufacturer breaks the warranty. Manufacturer is the only one responsible to fix the problem in such cases and this service cost will be charged to customer.
     If any part change is required under warranty period, it is subjected to same warranty and its warranty starts at the date of mounting.
     If customer requires a service technician/engineer from the manufacturer during the warranty period, this service price will be quoted and agreed with customer.
       Any part which slides are subject to wearing so is not covered by warranty
    The defects caused of purposeful or inaccurate usage of machine is not under warranty. This will be evaluated by the manufacturer during the service time by the responsible technician/engineer.
      Manufacturer is not responsible for any monetary loss of the customer due to machine breakdown even the reparation is under warranty.
      If the reparation requires a functional test or trial after the completion, the cost of required plate/piece under responsibility of the customer. If one trial is not sufficient to check, more trials can be required by manufacturer in the same condition.
DELIVERY:  
     Price includes the delivery, the manufacturer will inform to customer about the date of shipment and delivery. The customer should warn to manufacturer in written for any law, rule, vacations, road construction work or any other issue at the customer country which may affect the delivery date. Otherwise, the manufacturer is not responsible of any delay or penalty.
    The insurance cost is under responsibility of the customer if required. The manufacturer is not responsible for any damage occurred during the transportation.
       The manufacturer doesn’t accept any penalty if it not specified and agreed on the order confirmation.
     In case the customer requires functional test at the manufacturer location prior to shipment, the labor, plate, energy or other expenses will be charged to customer. This will be quoted and agreed with the customer prior to test.
INSTALLATION AND TRAINING:
Foundation drawing to be sent to customer after the order confirmed.
User manual will be given customer after the installation completed.
The electric and air line connections and wiring, their channels, covers which may require for open foundation zones etc., should be provided by the customer. 

Untuk pasar Indonesia AKYAPAK – AKBEND menunjuk perusahaan saya PT Tecno Mesin Utama sebagai Agen Sales serta Service

Selain itu PT Tecno Mesin Utama memegang keagenan untuk servis dan sales untuk beberapa brand ternama seperti

  • AKYAPAK (Plate Bending Roll Machine, Profile Bending Roll Machine, CNC Beam Drilling Machine, CNC Plasma Cutting Machine, CNC Flange Drilling Machine, CNC Plasma Oxy Drilling Machine, Self Align Rotator, Positioner, Coloum Boom, dll)
  • YSD (Press Brake, Guillotine Shearing, Iron Worker, Power Press, Notching, dll.)
  • BAYKAL (Press Brake, Swing Beam Shear, Laser Cutting, Turret Punching, Index Punch, Plasma Cutting, Water Jet dll.)
  • JFY (CNC Turret Punch)
  • JORNS AG (CNC Folding and Shearing Machine)
  • WOOJIN (Panel Punching Press, Bush Bar Bender, Bush Bar Cutter, Bush Bar Punch, dll)
  • GOLDEN LASER (YAG Laser, Fiber Laser and CO2 Laser Machine)
  • COSEN (Band Saw, Billet Saw, Vertical Saw)

Jika anda tertarik atau berencana membeli mesin-mesin diatas, anda dapat mendiskusikannya terlebih dahulu dengan saya.

Hubungi nomor HP: 0813-45026234 atau 0858-22116234

atau email ke kurniawan.saldy@gmail.com atau saldy@pt-tmu.co.id

2 komentar pada “Mesin Bodem / Dish End Press Machine”

  1. Dear Pak Saldy

    Mohon informasi untuk mesin Dish End Press, BMB , p,400 x 4000 . mesin ini maximal
    sampai ketebalan plate Stanless berapa mm, dan estimasi harga samai berapa, Thanks

    1. Ketebalan plat bisa sampai antara 40mm untuk mild steel dan 25mm untuk plat stainless dengan diameter maximum 4 meter.
      Untuk harga akan saya kirimi penawaran resminya pak.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *